Abus TVIP21502 User Manual

Also see for TVIP21502: User manual

Abus TVIP21502 User Manual Manual pdf 45 page image

108Passive mode: Enable this function if the FTP server was configured in passive mode.Test: When this button is pressed, the FTP server settings are tested. A test file isuploaded to the FTP serverSMTP:SMTP server address: Enter the address of the outgoing e-mail server here (SMTP server).Server port: The standard SMTP server port is 25. An alternative port can be assigned ifrequired.SSL: If the e-mail server uses SSL, it can be enabled here.Authentication: Define the authentication type for the e-mail account here.SMTP: If authentication on the e-mail server requires a user name and password, thisoption must be enabled.POP before SMTP: Select this option if e-mails must be retrieved before e-mails can be sent. It maybe possible to delete “POP before SMTP” in the e-mail account settings.E-mail sender: This is the address of the e-mail account. The maximum length is 64 characters.E-mail recipient: The e-mail address of the recipient. The maximum length is 64 characters.Test: When this button is pressed, the SMTP server settings are tested. A test file issent to the e-mail recipient.HTTP:Use this function to save image data (individual images) on an HTTP server. A CGI script on the HTTP servermust be able to receive the data. In the event of questions, please contact your network administrator.URL: Enter the URL of the HTTP server (e.g. “192.168.0.156/cgi-bin/webcam”).Port: Enter the port on which the HTTP server operates.User ID: User ID on the HTTP serverPassword: Password on the HTTP serverRepeat password: Reenter the password here.Proxy address: Server name when a proxy server is usedProxy port number: Port number of the proxy serverProxy user name: User ID on the proxy serverProxy password: Password on the proxy serverTest: When this button is pressed, the HTTP server settings are tested. A test file issent to the HTTP server.Network drive:Type: Protocol selection between the Windows network (SMB/CIFS) or UNIX network(NFS)Windows network (SMB/CIFS)Network storage capacity: Entry of the IP or drive/folder of the network driveEx.: \\IP\FolderEx.: \\my_nas:\Folder nameWorkgroup: Workgroup of the Windows network driveUser name: User name of the workgroup.Password: Password of the workgroup.Repeat password: Reenter the password for the workgroup here.Create folder: An additional subfolder is created on the network drive.Test: When this button is pressed, the network drive settings are tested. A test file issent to the network drive.Unix network drive (NFS):