Aastra SIP-DECT Installation And Administration Manual

Also see for SIP-DECT: Brochure Brochure Installation, administration and maintenance manual

Aastra SIP-DECT Installation And Administration Manual Manual pdf 24 page image

Installation, Administration and MaintenanceAastra Telecom Page: 24 (47)3.2 Static local configuration of an RFPAs an alternative to DHCP configuration, the RFPs/OMM may be individuallystatically configured using the OM Configurator tool.For a static local configuration you must use the java configuration toolOpenMobility Configurator which requires Java Runtime Environment version1.4 or higher.The settings, which are configured on the RFP with the tool OM Configurator,will be saved permanently in the internal flash memory of an RFP.The parameters configurable via the OM Configurator comply with the DHCPoption, please see section 3.1 for details.If a local static configuration has been done, DHCP is not used anymore.The following figure shows the OM Configurator. Note, version number willchange with each OMM release.To configure an RFP, at least the MAC address and all mandatory options(see table below) have to be set. The MAC address must be entered in aformat such as xx-xx-xx-xx-xx-xx.If the RFP has an IP address enter this address in the IP address field. In thiscase you can reach the RFP from outside the local LAN segment. Optional.To set additional parameters, press the “Add parameter” button and choosethe desired parameter.IMPORTANT: Select the “yes” checkbox for the RFP to “Use localconfiguration” otherwise DHCP will be used.