A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 8DMX SET UP (continued)5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables for DATA transmission inplace of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pindata cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at mostelectric stores. The chart below details a proper cable conversion.3-Pin XLR to 5-Pin XLR ConversionConductor 3-pin XLR Female (Out) 5-pin XLR Male (In)Ground/Shield Pin 1 Pin 1Data compliment (- signal) Pin 2 Pin 2Data True (+ signal) Pin 3 Pin 3Not used Do Not UseNot used Do Not Use