ADC ADG-75D Installation And Operation Manual

Also see for ADE-75: User manual

Contents

ADC ADG-75D Installation And Operation Manual Manual pdf 49 page image

45WARNING: When cleaning steam coil fins, be careful not to bend the fins. If fins are bent,straighten by using a fin comb which is available from local air-conditioning supply house.90 DAYS1. Remove lint from around basket (tumbler), drive motors, and surrounding areas.2. Remove lint from gas valve burner area with a dusting brush or vacuum cleaner attachment.3. Clean any lint accumulation in and around both the blower and drive motor casing openings.NOTE: To prevent damage, avoid cleaning and/or touching ignitor/flame-probe assembly.EVERY 6 MONTHSInspect and remove lint accumulation in customer furnished exhaust duct work system and fromdryers internal exhaust ducting.NOTE: THE ACCUMULATION OF LINT IN THE EXHAUST DUCT WORK CANCREATE A POTENTIAL FIRE HAZARD.NOTE: DO NOT OBSTRUCT THE FLOW OF COMBUSTION and VENTILATION AIR.CHECK CUSTOMER FURNISHED BACK DRAFT DAMPERS IN THE EXHAUSTDUCT WORK. INSPECT and REMOVE ANY LINT ACCUMULATION WHICHCAN CAUSE THE DAMPER TO BIND or STICK.NOTE: A back draft damper that is sticking partially closed can result in slow drying andshutdown of heat circuit safety switches or thermostats.NOTE: When cleaning the dryer cabinet(s), avoid using harsh abrasives. A product intendedfor the cleaning of appliances is recommended.STEAM MODELS- clean the steam coil fins. We suggest using compressed air and a vacuum cleanerwith brush attachment.