Thank you for selecting this ABB PSTX softstarter. Readcarefully and make sure that you you understand allinstructions before you mount, connect and configure thesoftstarter.This manual is an application manual intended for quickand easy installation and usage of a waste water pumpwith the PSTX softstarter. For complete information,see 1SFC132081M0201 - Softstarters Type PSTX30...PSTX370, Installation and Commissioning Manualavailable on: http://new.abb.com/low-voltage/products/softstarters• The softstarter shall be installed by authorizedpersonnel only.• ABB personnel must obey the ABB CISE 15.4instructions.• Always read the full manual before you use thesoftstarter.Saftey notesIn this user manual, these symbols are used:CAUTIONCaution symbol indicates the presence of ahazard which could result in personal injury.WARNINGWarning symbol indicates the presence ofa hazard which could result in damage toequipment or property.INFORMATIONInformation sign alerts the reader to relevant factsand conditions.Modifications to data in this manual can be applied withoutnotice.General saftey informationCAUTIONOnly authorized and appropriately trainedpersonnel are allowed to install and makethe electrical connection of the softstarter inaccordance with existing laws and regulations.WARNINGExamine the softstarter and the package whenyou unpack your new PSTX softstarter. If thereare damages, please contact the transportationcompany or the ABB reseller/office immediately.WARNINGDo not lift the softstarter by the connection bars,as this can damage the softstarter.WARNINGOnly authorized and appropriately trained servicepersonnel are allowed to do service and repairon the softstarter. Note: unauthorized repair willeffect the warranty.Read this firstWarning and saftey