3rd Power HD 100 User Manual
1Your 3RD POWER Amplifier is a professional musical instrument amplifier. The informationcontained herein is current at the time of publication. However, specifications are subject tochange without prior notice.PRECAUTIONS & WARNINGS• READ THESE INSTRUCTIONS.• KEEP THESE INSTRUCTIONS.• HEED ALL WARNINGS.• FOLLOW ALL INSTRUCTIONS.• YOUR AMPLIFIER IS LOUD!EXPOSURE TO HIGH SOUND VOLUMES MAY CAUSE PERMANENT HEARING DAMAGE !Practice “safe listening.”• No user serviceable parts inside. Refer service to qualified personnel. Always unplug ACpower before removing chassis.• IF YOU INTEND ON OPERATING THIS EQUIPMENT OUTSIDE OF THE USA: Always insurethat unit is wired for proper voltage. Make certain all connections and grounding con-forms with local standards. Make certain that you have obtained authorization to operateprior to connecting to power supply.• WARNING: Vacuum tube amplifiers generate heat. To insure proper ventilation alwaysmake certain there is at least four inches (100mm) of space behind the rear of the ampli-fier cabinet.• Keep away from curtains or any flammable objects.• WARNING: Do not block any ventilation openings on the rear or top of the amplifier. Donot impede ventilation by placing objects on top of the amplifier which extend past therear edge of its cabinet.• WARNING: Do not expose the amplifier to rain, moisture, dripping or splashing water. Donot place objects filled with liquids on or nearby the amplifier.• WARNING: Always make certain proper load is connected before operating the amplifier.Failure to do so could pose a shock hazard and may result in damage to the amplifier.• Do not expose amplifier to direct sunlight or extremely high temperatures.• Always insure that amplifier is properly grounded. Always unplug AC power cord beforechanging fuse or any tubes. When replacing fuse, use only same type and rating.• Avoid direct contact with heated tubes. Keep amplifier away from children.• Be sure to connect to an AC power supply that meets the power supply specificationslisted on the rear of the unit. Remove the power plug from the AC mains socket if the unitis to be stored for an extended period of time. If there is any danger of lightning occurringnearby, remove the power plug from the wall socket in advance.• To avoid damaging your speakers and other music equipment, turn off the power of allrelated equipment before making the connections.• Do not use excessive force in handling control buttons, switches and controls. Do notuse solvents such as benzene or paint thinner to clean the unit. Wipe off the exterior withsoft cloth. |
Related manuals for 3rd Power HD 100
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved