3onedata IES3016 Series User Manual

3onedata IES3016 Series User Manual Manual pdf 2 page image

IES3016-4F IES3016-6FIES3016-8F1. DIP switches (Retain)2. Console port (Retain)3. 2-pin terminal block for relay output (Retain)4. Ground screw5. Power input terminal block6. DIN-Rail mounting kit7. System running LED8. Power indicator9. Relay alarm LED10. Link/ACT LEDs11. 10Base-T /100Base-TX Ethernet port12. 100Base-FX fiber port【Appearance and dimension】The series of products are the same size, and the number of theEthernet interface is different. Unit (mm)【Power supply input】DC Series Switch:The product top panel provided 4 bit power supply input terminalblock, support DC input. DC power supply input supportedredundancy function, provided PWR1 and PWR2 power input,can use for single, and can connect 2 separately power supplysystem, use 1 pair terminal block connect the device at the sametime. If one of the power systems broke, the device can workun-interruptible. Built-in overcorrect protection, Reverseconnection protection. Voltage input range is 12 ～ 48VDC（terminal block defined as: V1-、V1+、V2-、V2+）.AC Series Switch:The Industrial Ethernet switches have singe power andredundancy power two kinds of power input. The singe power ACseries top panel provides 3 bit terminal block for AC100~240Vpower entered (L/+, PG, N/-)Important notice:1. Power ON operation: first of all, insert power cable’s terminalblock into device’s power port, then insert power supply plug intopower source2. Power OFF operation: First off all, unpin power plug, thenstrike the terminal block, please take care of operation sequence.【Communication connector】10/100BaseT(X) Ethernet portThe pinout of RJ45 port display as below, connect by UTP or STP.The connect distance is no more than 100m. 100Mbps is used120Ω of UTP 5; 10Mbps is used 120Ω of UTP 3, 4, 5.RJ 45 port support automatic MDI/MDI-X operation. Canconnect the PC, Server, Converter and HUB .Pin 1,2,3,6Corresponding connections in MDI. 1→3, 2→6, 3→1, 6→2 areused as cross wiring in the MDI-X port of Converter and HUB.10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pinin the table as below.1 8

/ 4

Related manuals for 3onedata IES3016 Series